KaVo LUX 1410 C, Инструкция по эксплуатации

Страница: 25 / 48

▶ Remove device cladding (see assembly instructions of the treatment unit).
▶ Slide the cover ring ① onto the mounting pole.
▶ Insert the mounting pole into the light holder as far as it will go ②.
▶ Align the mounting pole in such a way that the borehole for the brake points to
6 o´ clock position (6 o´ clock position corresponds to the direction of the main
switch of the unit).
▶ Fix the mounting pole with clamping screws ③ and PE screw ④.
▶ Guide the cover ring ① on the unit body as far as it will go.
Note
When the mounting rod extends into the light holder, it can damage the paint.
Firmly hold the mounting pole when inserting!
Make sure not the crush any lines.
Install the swinging arm
See also: Install the swivel arm, Page 19
Instructions for use KAVOLUX 1410 C
4 Assembly | 4.2 Mounting the device
23/44