KaVo KEY Laser 3+ 1343, Инструкция по эксплуатации

Страница: 55 / 80

With the aid of this menu, the detection of the laser is adjusted. The results of the
adjustment are administered separately for each handpiece (and each fibre tip).
4.16.1 Check or change the reference value
Note
The value indicated on the reference must correspond to the reference value on
the touchscreen .
7 5
C
If the letter on the touchscreen does not correspond to the letter on the reference,
the corresponding reference should be obtained through the Customer Service
Centre. For this purpose, it is essential to notify the contact person at KaVo of the
letter code of the reference value which is displayed on the touchscreen.
If the digit on the reference does not correspond to the digit on the touchscreen, the
digit on the touchscreen should be changed with the aid of the "Change reference
value" dialogue.
When the OK key is pressed, the reference value is accepted and you are returned
to the detector adjustment menu.
The change is performed in the Reference value menu with the aid of the arrow keys
and (to 75 in our example).
Note
The reference is located in a magnetically adhering plastic holder. It can thus be
fastened to the sheet metal cladding of the KEY Laser 3+ / III upgraded.
4.16.2 Start adjustment
▶ Have the reference sample ready.
Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
4 Operation | 4.16 Detector adjustment
53/76