KaVo KEY Laser 3+ 1343 Скачать руководство пользователя

Страница: 73 / 80

Note
If an error message still appears on the touchscreen, write down the content of the

error message and communicate it to the responsible service provider.

If an error message occurs, first check if the trigger key has been activated, or if it

was activated when the KEY Lasers 3+ / III upgraded was being turned on.

▶ Stop actuating the trigger key.

▶ Switch on the device.

If the error message reappears on the touchscreen, call service.

Note
The device immediately turns off when malfunctions arise that affect safety. There

is no message on touchscreen.

8.4

Troubleshooting

This part of the instructions is for self-help assistance.

If problems cannot be located or eliminated by using this troubleshooting method,

a technician trained by KaVo must try and eliminate the problem.

CAUTION

Danger when opening the KEY Laser

Damage to the device

▶ The KaVo KEY Laser 3+ 1343, KEY Laser III 1243 upgraded may only be

opened and repaired by specially trained technicians.

▶ Never open the KEY Laser!

Malfunction

Cause

Remedy

Nothing works.

The main switch is turned off.

▶ Turn on main switch.

The emergency-off switch has been

actuated.

▶ Turn off the emergency-off

switch.

The power cable is not plugged in. ▶ Plug in the power cable.

The handpiece does not emit any

spray.

The spray reservoir is empty

▶ Fill the spray water.

The spray regulating screw is

closed in the laser coupling.

▶ Open these spray regulating

screw.

The spray nozzle is clogged

▶ Cleaning the spray nozzle

The spray from the handpiece is

weak.

Calcified/contaminated spray noz‐

zle.

▶ Insert a nozzle needle into the

spray nozzle.

Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
8 Malfunctions | 8.4 Troubleshooting

71/76

Содержание KEY Laser 3+ 1343

















































































Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды

KaVo KEY Laser 3+ 1343, Инструкция по эксплуатации

Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды