10
CONTROLS, DISPLAYS AND CONNECTIONS
This section provides a brief description of all the controls, displays and connections.
Front panel controls and displays
1. On/Off
switch
1)
2. Channel select buttons (
▼▲
)
3. Display
Rear panel controls and displays
1. RJ 11 data interface/connection
port for an external IR sensor
2. VHF/UHF
input
socket
3. VHF/UHF
loop-through
output
4. Scart socket for VCR/AUX connection
5. Video output (composite colour)
6. Electrical digital data stream output
(SPDIF/Sony Philips Digital Interface
Format) for Dolby Digital AC 3 audio
7. Audio outputs (L/R) cinch sockets
8. HDMI
Output
9. Scart socket for TV connection
10. Mains power cable
VIEW OF FRONT PANEL (FLAP REMOVED)
VIEW OF REAR PANEL
1
)
The unit is not fully disconnected from the mains (see the sections “Safety Instructions - Important Instructions” and “Periods of
extended absence, thunderstorms, mains socket accessibility”)
The serial number sticker for the UFT 676sw is located on
the underside of the unit.
The information printed on it includes the following:
-
the exact designation (e.g. UFT 676sw)
-
the part number and
-
the serial number of the unit.
You do not need this information in order to operate the
unit. If however, contrary to expectations, you need to
make a claim under warranty and you do not have the
packaging for the receiver to hand, you can fi nd the
above information about the unit on this sticker.
