44
SEARCH CHANNELS (CHANNEL SEARCH)
Press the
button to move to the next selection item.
Channel Search Mode
Use the
buttons to select whether you wish to search “free and encrypted” or “only free”
channels.
Press the
button to move to the next selection item.
Network Search
Use the
buttons (On/Off) to select whether a network search should be performed. If you set
the network search to “Off”, only the frequency you previously selected will be searched for new as
yet unlisted channels.
If you set the network search to “On”, the frequencies (channels) network enables additional frequencies
(channels) that have not yet been saved to be located. They are then stored and searched for new
channels in the same way as the existing frequencies (channels). However, this will only work if this
service is available from your regional DVB-T network.
When you have made your settings, use the
buttons to select “Start Search” and press the
button to start searching. You can cancel the search at any time by pressing the
button.
During the search you will see a display that shows you the progress of the search and the channels
found so far. Newly found channels are identifi ed with the designation “New” after the channel name.
After completion of the search, you will
see the following message (example):
