27
EPG - ELECTRONIC PROGRAMME GUIDE
Selection options:
-
#
(red) button
Open the Plan recording (display of all pre-programmed recordings)
-
%
(yellow) button
Call up the “Preview” view
-
$
(green) button
Call up the “Current” view
-
button
Change the channel from within the “EPG” view
-
button
Next programme in the “Current” view
-
'
button
(P+) skip forwards 24 hours in the EPG,
(P-) skip backwards 24 hours
-
button
Select the currently selected channel in all views. Pressing the
or
the
button again closes the EPG and the selected channel is shown
again on the TV screen
-
(red dot) button
Add a programme to the recording settings
-
!
button
Shows any further information on the selected programme
Navigation within each view is always performed using the cursor buttons (
@
). The
buttons
allow you to select individual channels/programmes, and the
buttons allow you to scroll from
page to page of the currently selected list.
Pressing the
or
button exits the EPG and returns to the TV picture.
You will see information on the current or next following programmes in the EPG
only if it is supplied by the channel provider.
“CURRENT” VIEW
The “Current” view can be called up at any time in EPG by pressing the
$
(green) button.
In the “Current” view you can see all channels displayed in the order of the overall channel list. Provided
that EPG data has been supplied by the channel provider, the receiver shows for each channel the
current program being shown, with start time, fi nish time, and progression bar.
You can use the cursor buttons (
@
) to select the desired programme and if available you can use
the
!
button to call up further information on the desired programme.