Kathrein UFS 902 Скачать руководство пользователя

Страница: 63 / 88

SETTINGS

The selected menus, sub-menus and positions, as well as the parameters to be set, are each highlighted
in colour. The menus are largely self-explanatory.

Pay attention to the bar at the
bottom of the on-screen display.
These provide information on
what to do next.

Select the “Settings” menu using the menu button

, the

buttons on the main menu and

Use the

and the

button to open the “TV, Video and Audio” menu. The following display

appears (see next page):

Use the

buttons to select the further options. If there is another sub-menu layer, press the

button to open it. If there are no more sub-menus, make the settings using the

buttons

or the number buttons.

Press the

button to save your settings and return to the previous menu. Press the

button

to return directly to the TV picture, the changes will also be saved.

Содержание UFS 902

























































































Результаты поиска

Содержание UFS 902

Отзывы:

Похожие инструкции для UFS 902

Бренды по названию

Популярные бренды

Kathrein UFS 902, Руководство по эксплуатации

Результаты поиска

Содержание UFS 902

Отзывы:

Похожие инструкции для UFS 902

Бренды по названию

Популярные бренды