Kathrein UFS 902, Руководство по эксплуатации

Страница: 3 / 88

3
FOREWORD/IMPORTANT INFORMATION
The channels available on the satellites and transponders are subject to continual change. In such cases,
it is necessary to re-adjust the channels as the factory preset programming corresponds to the situation
on the date of manufacture. The information for these settings can be found on the Internet or in relevant
magazines.
Your receiver is equipped in the factory with the latest software version. We are however constantly working
on adapting the software to the wishes of our customers and to developments in technology. The “Software
and Channel List Update” section contains additional information.
Please keep the original packaging in case you need to return the product at any time!
Any modifi cations to the receiver software will invalidate the warranty!
You will have to bear the costs yourself for dispatching and repairing any receiver that requires
attention due to modifi cations to the software other than those provided by Kathrein!
Therefore exclusively use software provided by Kathrein for your receiver. This is available by
downloading from the satellite or from the Internet (www.kathrein.de).
The standby power consumption of < 1 W printed on the receiver packaging is achieved only when
the receiver is in stand-by mode with the display switched off. You can perform the setting in the
following menu: “Main menu”, “Settings”, “Customize screen menu”, “Front display in standby”
The information in this operating manual was correct at the time of going to press. We reserve the
right however to make changes at any time and without prior notice. If new software is released for
your receiver, and this affects the information in the operating manual (e.g. changes to the menus
and/or functions), if we believe it necessary we will make available a new operating manual for
download under “www.kathrein.de”.
Make a note of the receiver's basic settings, so as to be able to restore them if necessary!
Included in the software for this receiver is software that is licensed under the GNU (General
Public Licence). You can fi
nd out how to obtain the source code for the program at:
http://www.kathrein.de/linux/receiver/ufs902
The term DiSEqC™ used in this operating manual is a registered trade mark of the European
Telecommunication Satellite Organization (EUTELSAT).
Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF
THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27
th January 2003 on used
electrical and electronic appliances, it must be disposed of properly.
At the end of its service life, take this unit for disposal to an appropriate offi cial collection
point.
Used batteries are special waste!
Do not throw spent batteries into your domestic waste; take them to a collection point for used
batteries!
DISPOSAL INSTRUCTIONS
Do not switch the receiver off at the power switch directly from the operating mode! This
can lead to loss of data and corruption of the software.