Kathrein UFS 902, Руководство по эксплуатации

Страница: 26 / 88

26
FIRST INSTALLATION: Single-cable system (manual)
Selection “EXU 908”
Transmission channel
Use the buttons to select a free available transmission channel. A maximum of eight transmission
channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).
Secure channel with PIN
The EXU 908 single-cable matrix allows the transmission frequency to be protected by inputting a PIN.
No other receiver can then use that transmission frequency unless the PIN is input.
Select the setting “Yes” using the buttons. A line with the text “Password PIN” is then displayed.
Press the buttons to select this line. You can now use the number buttons to enter a PIN (0-255).
Test connection
When you have set a free transmission channel, press the buttons to switch to the “Test
connection” selection fi eld and press the button. The receiver now tests whether a connection to the
single-cable system can be established or not. As soon as the receiver has established a connection to
the single-cable system, you will see the following display:
Press the button to acknowledge this display.
Then press the button. You will be asked whether you
wish to save the changes. Use the buttons to select
“Yes, save changes” and confi rm by pressing the
button. Now press the
!
(green) button.
The receiver will automatically display the menu for the
channel search. Continue with the section (Execute
channel search).
If no connection to the single-cable system could be established, you will receive the message
“Registration was abortive!”.
Check your settings and if necessary call for expert help.
When the EXU 908 single-
cable matrix is being used, it is
essential that the LNB is set to
“Universal”!