Kathrein UFS 641si, Руководство по эксплуатации

Страница: 24 / 84

24
Selection “UAS 481” or “EXR 551”
Transmission channel
Use the

buttons to select a free available transmission channel. A maximum of four
transmission channels are available (1400, 1516, 1632 and 1748 MHz).
Test connection
When you have set a free transmission channel, press the

buttons to switch to the “Test
connection” selection fi eld, then press the

button. The receiver now tests whether a connection to the
single-cable system can be established or not. As soon as the receiver has established a connection to
the single-cable system, you will see the following on-screen display:
FIRST INSTALLATION: One Cable System
When the UAS 481 single-cable
feed system is being used, it
is essential that the LNB is set
to “Wideband”!
When the EXR 551 single-cable
switching matrix is being used,
it is essential that the LNB is set
to “Universal”!
If no connection to the single-cable system could be established, the following on-screen display appears:
Check your settings and if necessary call for expert
help.
Con fi rm this on-screen display with the

button.
Then press the

button. You will be asked whether
you want to save the changes. Use the

buttons
to select “Yes, save changes” and con fi rm by pressing
the

button. Now press the

(green) button.
The receiver will automatically display the menu for the channel search. Continue with the section
(“Execute Channel search”).