Kathrein UFS 641si, Руководство по эксплуатации

Страница: 18 / 84

18
Satellite
Use the

buttons to set the desired satellite (selection from 17 pre-programmed options).
LNB Type
Here use the

buttons to select the LNB type used in your system. The choice is between
“Universal” and “user-de fi ned”.
Universal:
No further entry is required, since all necessary frequency ranges are covered by a universal LNB.
User-de fi ned:
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB
was con
fi gured.
Use the

buttons to select the frequency range to be changed (low / high frequency).
Use the

buttons or the number pad to set the exact frequency for which your LNB was con fi gured.
Test transponder
To check whether the settings that you have made are correct, use the

buttons to move to the
“Test transponder” fi eld. Use the

buttons to select the required transponder from the various
ones listed. If your settings are correct, you will see at the top right of the screen the live signal
of a channel from the currently selected transponder.
If you do not receive a signal, check your settings again and if necessary call for expert help.
You have now completed all settings for the fi rst satellite. Press the

button to return to the
“Satellite selection menu” and perform the settings in the same way for the remaining satellites.
When you have
fi nished con fi guring the satellite press PIP (green). The receiver then automatically
calls up the selection menu for the channel search. Continue with the section (“Execute Channel search”).
FIRST INSTALLATION: DiSEqC™1.0
The following on-screen display
appears (example):