Kathrein UFS 641si, Руководство по эксплуатации

Страница: 22 / 84

22
Connected equipment
Use the

buttons to select the type of system to which they are connected or the single-cable
system components fi tted (refer to the manuals, instructions and notes for the system and the system
components). Available options:
- user-de fi ned
- KATHREIN UAS 481 (single-cable feed system, max. four receivers)
- KATHREIN EXR 551 (single-cable switching matrix, max. four receivers)
- KATHREIN EXR 552 (single-cable switching matrix, max. four receivers)
- KATHREIN EXU 908 (single-cable matrix, max. eight receivers)
- EXR 4 subscriber (for future Kathrein single-cable (switching) matrices, max. four receivers)
- EXR 8 subscriber (for future Kathrein single-cable (switching) matrices, max. eight receivers)
Selection “user-de fi ned”
Transmission channel
Use the

buttons to select a free available transmission channel.
Transmission frequency
Use the number buttons to enter the four-digit transmission frequency.
Secure channel with PIN
If your one cable system allows the transmission frequency to be protected by entering a PIN, this is
the menu where that can be done. No other receiver can then use this transmission frequency unless
the PIN is entered.
Use the

buttons to select the setting “Yes”. A line with the text “Password PIN” is then displayed.
Press the

buttons to select this line. You can now use the number buttons to enter a PIN (0-255).
FIRST INSTALLATION: One Cable System
If one or more receivers are
already present on the system
and an additional receiver is to
be connected, you must assign
the new receiver a transmission
frequency that is not already in
use (otherwise the receivers will
interfere with each other).
Depending on the system to which
they are connected, a maximum
of four or eight receivers may
be connected to a single-cable
system (a twin receiver counts
as two receivers).
No frequency can be used by more than one receiver.
The receivers would interfere with each other.
You can
fi nd the necessary information (transmission frequencies) in the
documentation supplied with your system.