Installation Menu
29
power supply in a corresponding multi-subscriber system.
DiSEqC
(Digital Satellite Equipment Control)
The control signals must be set according to the requirements of your
satellite system in the DiSEqC
TM
menu.
22 kHz signal
{OFF}
22 kHz not active
{High/Low}
22 kHz switches between high and low band
{Pos. A/B}
22 kHz switches between two satellites
Tone Burst
{OFF}
{High/Low}
activates the tone burst depending upon the
reception
frequency
{Pos. A/B}
selects the orbit position 1/3 or 2/4
{Opt. A/B}
changes between orbit position 1/2 and 3/4
{OFF}, {ON}
select {ON} if you want to operate the receiver on a
satellite reception system with DiSEqC
TM
capability
DiSEqC
TM
repeat (use in cascaded switching matrices)
{OFF}
no repetition of the DiSEqC
TM
signal
{ 1 }
the DiSEqC
TM
signal is repeated once
{ 2 }
the DiSEqC
TM
signal is repeated twice
UFO
“UFO
mini”
and “UFO
micro”
are specific SAT systems of the
Kathrein company. Please assume the required setting parameters
from the corresponding operating instructions.
UFO
mini
{OFF}/{ON}
(2)
Remote
Freq.
{XXXX}
(3)
UFO
micro
{OFF}/{ON}/{RESET}
You select the main menu with the [MENU] button. The required sub-
menus are activated according to the stated number buttons [1]-[X] or
with the channel buttons [
▼
] / [
▲
]. In this case the selected submenu
is framed in colour and the associated help text appears. You then se-
lect the submenu activated this way with the [OK] button. Further
branching into the submenus is carried out in the same way.
Содержание UFD 516
