Kathrein UFD 516, Руководство пользователя

Страница: 30 / 40

Installation Menu
30
If the receiver is used for the first time with a UFO

micro recep-
tion system, then delete the previously allocated address. You do
this in the “UFO

micro” menu item by selecting “Reset” using
the [ ◄ ] / [ ► ] buttons and [OK].
The receiver is allocated the original factory setting in this case.
The pre-programming is not deleted by the reset.
The default is “Off”.
You reach the next level in each menu or exit the menu with the
[EXIT] button.
The changes made are accepted only if you press the [OK] button in
response to the “Save changes” query after exiting the menu with the
[EXIT] button. Activation of UFO

micro is signalled in addition on exit-
ing the DiSEqC
TM
/UFO

micro settings.
Download-Over-Air (software update via satellite)
In the “Download” submenu you can reload the operating software
and channel lists (in each case individually) of your receiver via the
ASTRA satellite (update via Download-Over-Air).
Your reception system must be aligned to the ASTRA 19.2° east
satellite for this purpose.
Note: To see the status of the software on your receiver, press the “i” button
in the main menu (this is also displayed on download).
Note: Note that on an update of the channel lists, your individual channel
arrangement in the ten favourite banks in TV and RADIO is overwrit-
ten by the current channel list!
a) Start the software download in the “INSTALLATION” menu
after selecting the “Download” menu (6) with the [OK] but-
ton. The download then runs in several phases, whereby the
individual phases are accompanied by corresponding infor-
mation. You can interrupt these phases at any time.
b) Search for the download channel on the ASTRA satellite.
This search run takes place at the first receiver start-up and
can last a few minutes.
On a renewed start the stored download channel is set di-
rectly.
c) Loading the receiver identifier. This process can also last
several minutes.
d) According to the availability of new data (operating program