Kathrein UFD 516, Руководство пользователя

Страница: 23 / 40

Menu Structure - Channels
23
Transponder search run
All channels of a transponder are searched for in the transponder
search run.
If the parameters (satellite, frequency, polarization, symbol rate) of the
searched for channel are known, the transponder search run can be
used.
For instance, if a new channel goes into operation for a known chan-
nel group, then it is sufficient to set a channel from this channel group
in advance using the channel selection, the required parameters are
assumed in the transponder search run.
If the “No signal” message appears in the “START” line, then no re-
ception is possible. Please check once again the satellite, frequency,
polarization and symbol rate parameters.
The search run can be started only if “Signal!” is displayed.
Start the search run with the [OK] button.
Encrypted channels are identified with “$”. You can delete individually
with the [TEXT] button channels which you do not want to include in
the channel pool.
New channels are marked with “+”. They are assumed in the channel
pool by pressing the [OK] button.
Manual entry (for experts
)
Should neither the satellite nor the transponder search run find the
desired channel, then all relevant reception parameters can be set in
the “Manual”. The manual entry is very helpful, for instance, if the re-
ception data of the desired channel are known, but the channel does
not transmit continuously.