Kathrein UFD 516, Руководство пользователя

Страница: 15 / 40

Channel Selection
15
r E c
Timer
The “Timer Programming” menu is selected in the main menu under
item 5. Up to 8 timer events can be entered optionally with TV or radio
channels.
Note: Please note that in the selection “VCR Record = Standard” the video
recorder must also be set to identical recording times
(see also signal
paths / VCR record).
Note: Please note that no remote control commands are accepted during a
timer recording, so that OSD picture displays are not recorded unin-
tentionally. The volume is switched to full level for recording. As indi-
cation that a timer recording is active, “r E c” is displayed on the pro-
gramme display on the receiver if a command is received from the
remote control.
The timer recording can be stopped prematurely only by the [ ] but-
ton = stop button. “End” is displayed after stopping. The receiver can
now be operated normally again.
If the timer recording is started from stand-by, then the receiver
switches back to stand-by after the end of recording.
[1-8] Select the next free input field with the
number buttons [1]-[8] or with [
▼ ] or [ ▲ ].
[ ► ][ ◄ ] Select the input field for {Date}, {Start}, {Stop} and
{Channel} one after the other.
(The input field is highlighted white).
[OK]
Activate the input in the selected field with the [OK] button.
(The input field is highlighted black).
Enter the relevant event either directly with the number buttons [0]-[9]
or by switching on with the [
► ]/[ ◄ ] buttons.
[OK] Close the entry with [OK] and select the next input field.
[EXIT] After entering {Date}, {Start}, {Stop} and {Channel} you can
leave and acknowledge the timer menu with [EXIT] or enter
further switch-on events.
The data from the programme preview can be transferred to the re-
cording timer at the push of a button. If a programme preview is avail-
able, select the desired programme and transfer the data with the red
button [
● ] directly into the timer.
Deleting timer programming:
[1-8]
Select the timer line to be deleted with the number buttons
[1]-[8] or with [
▼ ] or [ ▲ ]
E n d