Katanax X-FLUXER, Руководство пользователя

Страница: 14 / 86

12
 No gases used, so no post-combustion products released
 Minimal heat dissipation; no need for a powerful vent hood
 No hazardous voltage on the sealed heating elements
Versatility
 Expandable from 1, 2 to 3 positions
 Makes glass disks for XRF and can also readily do peroxide or pyrosulfate
fusions
 Stores up to 32 different fusion programs
 With optional solution agitation module, can also prepare solutions
 Ready to fuse with built-in methods for oxides, minerals, metals, alloys,
sulfides, fluorides and more
 Can perform solid oxidations
 Fully customizable fusion methods
 USB connectivity
 Accept mold sizes from 30 to 40-mm nominal diameters
Productivity
 Simultaneous processing of up to three (3) samples for XRF or ICP/AA
 Throughput of up to 15 samples/hour (when preparing acid solutions)
 Fast initial heat-up time of about 15 minutes
 Productivity is enhanced by a user-adjustable holding temperature.
Therefore, the temperature between fusions can be maintained to minimize
initial ramping time
 Individual mold blowers for fast cooling after the fusion
 Automatic detection of failed heating elements
 Heating elements can be replaced without cooling the furnace down
Durability
 Sealed, non-brittle heating elements are impervious to flux
 All-ceramic platinumware holders without moving parts
 Ability to continue working even with a failed element
 Chimneys vent out corrosive halogen gases
 Sturdy industrial-grade modular electronics
 Robust IP65 rated industrial interface
 Dedicated PLC-based programming (not Windows ® dependent)
 Low-maintenance
Simplicity
 Easy installation, easy use
 Single-phase power, no separate power supply
 Intuitive touch-screen color LCD graphics interface
 Easy icon navigation
 Multilingual interface
 A simple, intelligent, high-performance furnace
 Easy component access
 USB-upgradeable firmware
 CPLive™ remote access
 1-year limited warranty