Katanax X-FLUXER, Руководство пользователя

Страница: 79 / 86

77
Error / warning
codes listing
Error
Code Description
D1 Door motor slipped.
D2 Over-temperature door motor drive.
D3 Pre-Warning – Over-temperature door motor drive.
D4 Short to ground - Loop A Door motor.
D5 Short to ground - Loop B Door motor.
H1 Element #1 low power detected.
H2 Element #2 low power detected.
H3 Element #3 low power detected.
H4 Element #4 low power detected.
H5 Element #5 low power detected.
H6 Element #6 low power detected.
H7 Element #7 low power detected.
H8 Broken SSR or leak current to Ground.
H9 Two or more heating elements show low power.
H10 Max Power exceeded. Short-circuit or broken element.
H11 Furnace: overheating.
H12 Furnace: temperature is not increasing.
H13 HMI detected: overheating.
H14 Low voltage detected.
M1 Motor controller: communication problem.
P1 Pause.
P2 Preheating.
R1 Rocking motor slipped.
R2 Over-temperature rocking motor drive.
R3 Pre-Warning - Over-temperature rocking motor drive.
R4 Short to ground - Loop A Rocking motor.
R5 Short to ground - Loop B Rocking motor.
S1 Sliding motor slipped.
S2 Over-temperature sliding motor drive.
S3 Pre-Warning – Over-temperature sliding motor drive.
S4 Short to ground - Loop A Sliding motor.
S5 Short to ground - Loop B Sliding motor.
T1 Thermocouple not connected.
T2 Thermocouple error.
T3 Temperature controller: communication error.
T4 Temperature controller: error.
T5 Temperature controller: not read.
T6 Temperature controller: timeout.