Kantech KT-NCC, Руководство по установке

Страница: 21 / 46

DN1611-1809 21
KT-NCC Installation Manual
f Check the connection status. (See instructions on page 37.)
WAN
Configuration
(cont’d)
Port forwarding
Before you start configuring the KT-NCC in a WAN environment, we suggest that you verify the port
forwarding parameters with the System Administrator.
• Port forwarding configuration is only done on static IP or reserved DHCP addresses.
• Port forwarding is done to the same IP address. If you install more than one KT-NCC with a
router, you should use different ports for every KT-NCC.
NT-NCC Forward
address Port Connection
type Protocol
Host router Server IP
address 18002 TFTP firmware
update UDP
Server IP
address 18701 Device
communications UDP
Host router
for
redundant
server Server IP
address 18702 Device
communications UDP
Remote
router Device IP
address 18703 Optional
broadcast UDP
Device IP
address * 18710 Device
communications UDP
Device IP
Address 80 First configuration TCP
* This is the default port and you can change it in the configuration.