Kanomax 3900 Скачать руководство пользователя страница 7

Страница: 7 / 63

1. Part Names and Functions

1. Part Names and Functions

1.1 Airborne Particle Counter

FRONT

BACK/LEFT

Inlet

--- Particles enter the unit here. Attach the

provided standard inlet. To use the provided
isokinetic suction probe, attach Tygon tube on
the end of the standard inlet.

LCD Touch Panel

--- This touch panel allows you to setup and

control all instrument functions.

Paper Cover Open Button

--- Press this button to open the cover when

changing the printer roll-paper.

Printer

--- For printing measurement data. Set the printer

roll-paper here.

Power Switch

--- When the main power located on the rear of the

unit is ON, you can turn ON/OFF the power
using this button.

Outlet
--- Filtered sample air is exhausted at this port.

Do not block the pump as it may result in the
damage to the instrument.

Optional Sensor Connecting Terminal

--- Terminal to connect the optional sensor. Refer to

4. Connecting Optional Extras

for details.

Battery Compartment

--- Insert rechargeable battery here. Refer to

2.1

Power Supply

for how to install the battery.

Main Power Switch (For AC)

--- Use this switch to turn ON/OFF the main power.

You can also connect the provided AC cord to
supply the power.

CF Card Insertion Slot

--- Insert the CF card using the provided card

reader to store measurement data.

USB Connector (Right) **Factory Use Only**

Ethernet Connector (Left)

--- To be used when controlling the instrument by the

software. For details, refer to the operation manual

for the software.

www.actoolsupply.com

Содержание 3900
































































Результаты поиска

Содержание 3900

Отзывы:

Бренды по названию

Популярные бренды

Kanomax 3900, Руководство по эксплуатации

Результаты поиска

Содержание 3900

Отзывы:

Бренды по названию

Популярные бренды