3. Display Description and Operation Procedure
27
3.6.5 STAT
If there are any MAP files saved, select the FILE to
load it.
Tap the entry field for “SAMPLE T”. to display a
numeric keypad. Enter “hour”, “minute” and
“second” on the numeric keypad and tap [OK].
Tap the entry field of “CYCLES” to display a
numeric keypad. Enter a value and tap [Enter].
Once a MAP file is loaded, you cannot change the
settings for SAMPLE POINT. (The configured
number of measurement points in the MAP file will
be applied.)
When a MAP file is not loaded, tap an entry field of
“SAMPLE POINT” to display a numeric keypad.
Enter a value and tap [Enter].
Check “AUTO SAVE” to store data automatically.
Check “AUTO PRINT” to print data automatically.
Check “START DELAY” to use delay time prior to a
measurement.
Tap [OK] to save and activate the settings.
Tap “PRESET” to display a window asking you to
input “PRESET NAME”.
Tap the entry field to display the keypad. Enter the
file name and tap [Enter].
Tap [OK] to save the current settings (including
AUTO SAVE, AUTO PRINT and START DELAY)
on the CF card.
* In the future you can automatically load the
configuration saved here as a PRESET. Refer to
3.8 PRESET
.
www.actoolsupply.com
www.actoolsupply.com
