3. Display Description and Operation Procedure
13
3.5.2 STAT
- When not using MAP
(Refer to
3.6 CONFIG
for using a MAP.)
Tap [START] to display “CONFIRM” window.
A measurement will start based on the setting
configured in “3.4 MODE ” and “3.6 CONFIG”.
z
If “START DELAY” is NOT checked in
“CONFIG” setting:
Upon tapping [START], the pump will begin
running. After the pump has run for 10 seconds to
stabilize, the measurement will begin.
z
If “START DELAY” is checked in
“CONFIG” setting:
Upon tapping [START] the Delay Time
configured in
3.9.2 CONTROL PANEL –
OPTION – START DELAY
begins. During the
last 10 seconds of that Delay Time the pump will
run to stabilize, after which the measurement will
begin.
Tap [START] to start a measurement.
Tap [STOP] to stop a measurement.
Tap
button while measuring to display a chart.
Tap [STOP] to stop a measurement.
www.actoolsupply.com
www.actoolsupply.com
