Kanomax 3900 Скачать руководство пользователя страница 49

Страница: 49 / 63

3. Display Description and Operation Procedure

In SOUND setting, configure the following settings;

VOLUME

ALARM SOUND

On VOLUME tab, adjust the tap volume using

sound volume slider or “Soft” and “Loud” buttons.

To mute tap sound, uncheck “Operations” and

“Screen taps”.

“Operations” indicates the sound when displaying

error message.

“Screen taps” indicates the sound when tapping the

screen.

Use “Soft” and “Loud” buttons to change the tone.

In the ALARM SOUND tab, configure an alarm

setting.

Select an alarm sound from WAV file stored in CF

card.

Tap [PLAY] to play the selected WAV file.

Tap [APPLY] to save the setting value that is

displayed at the moment.

Tap [OK] to save the setting values in all the tabs,

and to close the window.

Tap [CANCEL] to discard the configured settings,

and the previous settings will be applied.

In the COMMUNICATION SETTING, configure

the setting for Ethernet connection. This setting

shall be configured when connecting the instrument

to PC using remote console or remote mode.

For the HOST NAME, enter the instrument name to

be used when it is connecting by Ethernet.

FOR IP ADDRESS, check AUTO to acquire IP

ADDRESS automatically. If AUTO is unchecked,

enter IP ADDRESS and NET MASK.

Tap [OK] to save the settings and to close the

window.

Tap [CANCEL] to discard the configured settings,

and the previous settings will be applied.

· SOUND

· COMMUNICATION

www.actoolsupply.com

Содержание 3900
































































Результаты поиска

Содержание 3900

Отзывы:

Бренды по названию

Популярные бренды

Kanomax 3900, Руководство по эксплуатации

Результаты поиска

Содержание 3900

Отзывы:

Бренды по названию

Популярные бренды