Kanomax 3900 Скачать руководство пользователя страница 3

Страница: 3 / 63

Important Safety Information

Important Safety Information

In this manual, warning types and classifications are defined as follows.

[Classification]

WARNING: To Prevent Serious Injury or Death

Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or death.

CAUTION: To Prevent Damage to the Product

Indicates a potentially hazardous situation which, if not avoided, may result in damage to the product that may

void the product warranty.

[Description of Symbols]

△

Indicates the condition (including danger) that requires caution. The subject of each caution is illustrated inside the

triangle (e.g., the symbol shown on the left is high temperature caution).

Indicates prohibition. Do not take the prohibited action shown inside or near this symbol (e.g., the symbol shown on the

left prohibits disassembly.)

●

Indicates a mandatory action. A specific action is given near the symbol.

WARNING

Do not disassemble, modify or repair the instrument.

…… A 3B laser diode is used as the optical source inside the instrument. Therefore, never attempt

to disassemble the instrument as it is extremely dangerous Also disassembling the unit may
result in short circuit and malfunction.

Use the instrument properly by carefully following this operation manual.

…… Misuse of the instrument may result in electric shock, fire, damage to the instrument, etc.

If any abnormal noise, unusual odor or smoke is emitted, or any liquid enters into the
instrument, turn the power off immediately, remove the battery and disconnect the power
cable.

…… It may result in electric shock, fire, or damage to the instrument. Return the instrument to

your distributor or to your KANOMAX service center for repair.

Do not use this instrument in an ambient temperature above 40 °C.

…… The performance may deteriorate significantly.

Also, dielectric degradation may occur, which may result in short circuit or fire.

Do not

modify/disassemble

Handle Properly

Prohibited

Installation

www.actoolsupply.com

Содержание 3900
































































Результаты поиска

Содержание 3900

Отзывы:

Бренды по названию

Популярные бренды

Kanomax 3900, Руководство по эксплуатации

Результаты поиска

Содержание 3900

Отзывы:

Бренды по названию

Популярные бренды