3. Display Description and Operation Procedure
30
Check “AUTO SAVE” to store data automatically.
Check “AUTO PRINT” to print data automatically.
Check “START DELAY” to use delay time prior to
a measurement.
Tap [OK] to store and activate the settings.
Tap [PRESET] to display a window asking you to
input “PRESET NAME”.
Tap the entry field to display the keyboard. Enter
the file name and tap [Enter].
Tap [OK] to save the current settings on the CF
card.
When specifying a MAP file in “SCHEDULE”, tap
[MAP] button to display MAP.
([START] and [STOP] buttons are inactive.)
You can change the location order.
Tap the Location to be changed. Use [UP] and
[DOWN] buttons to change the order.
Tap [OK]. Then a window will be displayed asking
if you want to save the new order of the Location.
Tap [YES] or [NO].
Tap [YES] to set the changes and go back to
[CONFIG] setting screen.
Tap [NO] to go back to display MAP.
Tap [CANCEL] to discard the changes and go back
to [CONFIG] setting screen.
www.actoolsupply.com
www.actoolsupply.com
