Kampmann Katherm QE, Инструкция по сборке и установке

Страница: 2 / 20

2
. 2.42 Katherm QE –
Tangential fan convection with electric heating element
Ready-to-install convector-based floor trenches
Assembly and installation instructions
Key to symbols:
Caution! Danger!
Non-compliance with
this information can
result in serious personal
injury or
damage to property.
Danger from
electrocution!
Non-compliance with
this information can
result in serious personal
injury or
damage to property from
electrocution.
Carefully read these
instructions in full prior
to any assembly and
installation work!
Anyone involved with the
installation, commissioning
and use of this product is
obliged to pass these
instructions on to tradespeople
who are involved at the same
time or subsequently, as well
as to end users or operators.
Retain these instructions until
final decommissioning!
We reserve the right to
make content or design-
related changes without
prior notice!
Contents
1. Correct and proper use .....................................................................3
2. Safety information ...........................................................................4
3. Scope of delivery ...............................................................................5
4. Levelling
.............................................................................................5
5. Screeding ............................................................................................6
6. Grille fixing .........................................................................................7
7. Dimensions · Connection openings · Heat outputs ........................8
8. Number of height adjustment feet and raised floor feet ............10
9. Maintenance
....................................................................................10
10. Electrical wiring .............................................................................11
10.1 Control .....................................................................................12
10.2 Control strategy ........................................................................12
10.3 Description of PCB control ........................................................14
10.4 Cabling .....................................................................................16