Kampmann Katherm QE, Инструкция по сборке и установке

Страница: 7 / 20

7
Katherm QE –
Tangential fan convection with electric heating element
2.42
Ready-to-install convector-based floor trenches
Assembly and installation instructions
6. Grille fixing
High surface temperatures can be produced on the electric finned element (electric
heating element). For this reason, additional grille fixings have been factory-fitted as a
safety guard along both long sides of the trench.
The grille can only be removed using a tool. The grille fixing only needs to be removed
on one side at the electrical connection side when wiring.
Refit the grille fixing once the unit has been wired.
Installation cover:
Important: Never operate the Katherm QE or the electric heating element with the
installation cover fitted.
Once the installation cover has been removed, place the grille in position and fix in place
with the grille fixings and self-tapping screws.
Important: Never cover the Katherm QE grille while the unit is running!
Ka therm QE - grille fixing Ka therm QE - grille fixing
1
Roll-up grille
2
Grill fixing with self-tapping screws
3
Grille fixing detail
1
3
2
2