3
Katherm QE –
Tangential fan convection with electric heating element
2.42
Ready-to-install convector-based floor trenches
Assembly and installation instructions
1. Intended use
Kampmann Katherm QE are built in line with the state of the art and
recognised safety regulations. Nevertheless, their use can result in danger
to people or damage to the product or other material assets if they are
not appropriately installed and operated or correctly and properly used.
Katherm QE are solely intended for use indoors (e.g. residential
properties,commercial properties and showrooms etc.). They should not
be used in humid areas, such as swimming pools or outdoors. Protect
the products from any moisture during installation. If in doubt, check the
proposed use with the manufacturer. Any use other than the use specified
above is deemed not to be correct and intended. Any damage resulting
from this is the sole responsibility of the operator of the unit. Correct and
proper use is also deemed to include compliance with the installation inst-
ructions described in this manual.
The installation of this product requires specialist knowledge of heating,
cooling, ventilation and electrical engineering. This knowledge, generally
learned in vocational training in one of the fields mentioned above, is
not described separately. Errors with the wiring can lead to the unit being
damaged! Damage resulting from improper installation is the sole respon-
sibility of the operator of the units.
Ka
therm
QE
1
Optiline roll-up grille
2
Floor trench, graphite-grey painted
3
Frame profile
4
Raised floor feet with sound insulation
5
Height adjustment feet with sound insulation
6
Electrical wiring
7
EC tangential fans
8
Electrical heating element
9
Air baffle
10
Power control unit
11
Safety chain
12
Bracing
13
Cover plate
1
3
2
5
6
9
7
10
13
12
11
8
4
Содержание Katherm QE
Страница 19: ......