Full digital mechanical sector scanning ultrasonic diagnostic instruments (Vet) User’s Manual V1.07
- 22 -
Chapter 9 Storage and Transportation
Storage and Transportation
1. If the instrument is stored over 3 months, take out the instrument from the packing case, connect
it to power supply for 4 hours, and then disconnect the power and place it in the case again
following the direction indicated by arrows on the package. Store the case in the warehouse. Do
not pile the case. The instrument case should have adequate space from ground, walls and ceiling
of the warehouse.
2. Environment requirement
Ambient temperature: -20
℃－
55
℃
; Relative humidity: 30%
－
93% (without condensation);
Atmospheric pressure: 700hPa-1060hPa. The warehouse should be well ventilated and free of
direct sunlight and corrosive gas.
3. Shockproof measures have been taken inside the packing case to allow for transport by air,
railway, land and sea. The goods shall not be exposed to poor weather conditions like rain and
snow, nor shall the goods be placed upside down, bumped, knocked or over-stacked.
Chapter 10 Safety Classification
1. Classified according to electric shock protection type:
Class I, internally powered equipment
2. Classified according to electric shock protection degree:
Type B applied part
3. Classified according to the degree of protection against ingress of liquid:
Main unit belong to IPX0 equipment
4. Classified according to operation safety in condition of existence of flammable anesthetic
mixture with air or oxygen or nitrous oxide:
It is neither of category AP equipment nor of category APG equipment
5. Classified according to mode of operation:
Continuous operation equipment
6. Classified according to the protection of radio services:
Group I Class A equipment