
Full digital mechanical sector scanning ultrasonic diagnostic instruments (Vet) User’s Manual V1.07
- 6 -
5.1 System installation
Please carefully read through and fully understand the use-method before installing the system,
and check the goods for its completeness according to the packing list furnished. This system
provides the following several usages, for the user to select:
1. Place the instrument on a desktop to use
2. Instrument fixed in the wrist to use
a. Extend your hand into the Velcro straps, the strap worn on the wrist, and then the Velcro
through the back ring;
b. According to arrow direction tighten the Velcro to suitable position then closely fitting.
5.2 Install/Remove the battery
Service personnel or operator can replace the battery. Before replacing the battery, please
contact Kaixin Company; replace the battery under the guidance of Kaixin Company. Please use
the battery provided by Kaixin Company.
1. Install the battery
With four M3*6 pan-head screws fix the battery on the lower case of main unit, paste the
Velcro on the buckle postion, then put the buckle into the battery, at last with two M3*6
pan-head screws fix the buckle on the lower case of main unit, as shown:
Buckle
Battery
the lower case
of main unit
2. Remove the battery
First open the Velcro, remove the straps, and then use a screwdriver to remove two M3*6
pan-head screws to remove the buckle, then unscrew the four M3*6 pan-head screws,
remove the battery.
Attention:
when
using the Velcro straps, if allergy, please consult a doctor
immediately and increase protective measures (e.g. Wear gloves before use).