Kaixin MSU3 Скачать руководство пользователя страница 25

Full digital mechanical sector scanning ultrasonic diagnostic instruments (Vet)                                                    User’s Manual V1.07 

- 19 - 

5. Clean the LCD screen 

Use a soft cloth dipped in glass cleaner to clean the LCD screen, and then air-dried. 

 
 
 

 
 
 

6. Clean the control panel and shell 

Clean  the  instrument  surface  with  soft,  dry  cloth  or  with  soft  cloth  dipped  in  moderate  water 

cleaning media to remove the blots, and then dry the instrument with soft, dry cloth or with air. 

7. Clean the shutter release 

(1) Use the soft dry cloth to wipe the shutter release; 
(2) If it is difficult to wipe away the blemish, clean with soft cloth dipped in moderate detergent 

and then air-dry it. 

8.1.2 Replace the fuse 

Replace the fuse is to replace the power adapter. 

 

 

 
 
 
 

 

8.1.3 Use and maintenance for the rechargeable battery 

1. Only use the battery pack (model JQ0157-02L) provided by KaiXin Company; the battery 

pack can only be charged in the main unit. Service personnel or operator can replace the 
battery pack. 

2. Plug the output port of adapter into the DC power input interface of main unit to charge. The 

charge indicator is red and blinking state when charging; the charge indicator is green and no 
blinking when fully charged. 

3. The charging time is more than about 4 hours, over-charging or discharging will shorten the 

battery life; the full charged battery can be used about 5 hours. 

 
 
 
 
4. Battery is consumable; the battery cycle-life is based on the times of charge and discharge as 

unit. When the use time reduced significantly compared with normal conditions, the battery 
should be promptly replaced. 

5. The excess high or low temperature will affect the charging and discharging performance, 

and short the battery life and capacity. 

 

 
 
 

Attention:

 Do not clean the screen with hydrocarbon detergent for example alcohol 

etc or OA equipment cleaning media. 

 

Attention:

  Prohibit  using  sharp  objects  to  touch  the  LCD  screen,  and  prohibit 

pressing or squeezing against the LCD screen. 

 

Attention: 

 

1. The fuse is inside the power adapter.

 

Fuse shall be replaced by qualified service 

personnel who get KAIXIN approval.

 

2. 

Before replacing the fuse, please contact KAIXIN, replace the fuse under the 

guidance of KAIXIN.

 

3. Before replacing the fuse, you must disconnect the mains supply. 

 

4. Fuse Type: T3.15AH250VAC.

 

Attention:

  Power  indicator  in  the  bottom  of  image  area  will  appear  “

”  and 

glitter  continually  when  the  electric  quantity  is  too  low.  Connect  the  main  unit  to 
external power supply and recharge the battery, or turn off the machine to recharge.

 

Attention:

  Battery  is  consumable;  the  battery  cycle-life  is  based  on  the  times  of 

charge and discharge as unit. When the use time reduced significantly compared with 
normal conditions, the battery should be promptly replaced.

 

Содержание MSU3






























Отзывы: