kago 1001950, Руководство пользователя

Страница: 70 / 113

1
2 3
LB RB
Fig. 57: Control elements on underside of device
1 Multi-function button on left 3 Multi-function button on right
2 Cover for USB port
Depending on how long the buttons are held down for and the chosen button combination, multiple functions
are available. The flashing sequence of the status LEDs on the front side of the housing provides information
about each of the functions initiated by way of the multi-function buttons.
The following principles are applied when keys and LEDs are used:
– Briefly pressing the right-hand multi-function button (~ 0.5 sec.) serves to confirm that the desired function
should commence.
– If the Operating LED and the Feed-in LEDs are flashing quickly and in tandem (~0.2 sec.), this indicates that
a function has commenced.
– If the Operating LED and the Feed-in LEDs are flashing quickly yet alternately (~ 0.2 sec.), this indicates that
a function is being performed (for functions that take a long time to complete, such as firmware updates).
– If the Operating LED and the Feed-in LEDs are flashing slowly and in tandem (~ 1 sec), this indicates that a
function has been completed successfully.
– If the Fault LED is flashing slowly (~ 1 sec), this indicates that a function has not been completed success-
fully or a timeout has occurred at the confirmation stage.
Depending on how long the buttons are held down for and the chosen button combination, multiple functions
are available. Information is provided by way of the flashing sequence of the 3 status LEDs on the housing
cover.
Signal Icon LED status Meaning Note
"Operating" LED illu-
minated Procedure in progress
"Operating" LED and
"Feed-in" LEDs flash-
ing
in tandem
Procedure completed success-
fully.
"Operating" LED and
"Feed-in" LEDs flash-
ing
quickly and in
tandem
Procedure has commenced.
"Operating" LED and
"Feed-in" LEDs flash-
ing
quickly yet al-
ternately
Procedure has commenced. The procedure will: last up to
10 mins for firmware updates
or up to 30 secs for para-
meter updates.
"Fault report" LED
flashing quickly
The procedure has not been
completed successfully or a
time limit for pressing a button
again has elapsed.
"Fault report" flash-
ing slowly
9 | Configuration and operation Manual
KACO blueplanet 100 TL3 Page 70
EN