Description
Figure
Corner panel brace, discharge port
11
=
888484.1
➤ Place the corner panel brace at the dis‐
charge port side
11
on the corner panels
and secure from the inside with 8 hex-head
screws
50
.
End frame, inlet side
12
HB 1300 PI pr = 830065.0
HB 1600 PI pr = 830128.0
➤ Position the end frame
12
on the corner
panel brace at the discharge port and the
upper side panels with 2 hex-head
screws
50
.
➤ Use silicone sealant to paste the pre-cut
foam to the end frame at the inlet side.
End frame, exhaust air
13
= 830059.0
➤ Position the exhaust air end brace
13
on
the block-end corner panels and install with
2 hex-head screws
50
at the upper side
panels.
Upper side panels
8
= 888456.1
➤ Install 2 upper side panels
8
between the
exhaust air end brace and the inlet end
frame with 4 hex-head screws
50
each.
Door post
14
= 888470.1
Upper side column
15
= 888466.1
Cover cross brace
16
= 888461.1
➤ Install the door posts
14
, upper side col‐
umn
15
and cover cross brace
16
with
4 hex-head screws
50
each.
6
Installation
6.10 Options
Number: 9_9572 28 USE
Installation and Operating Manual Rotary lobe blower
HBPI pr
51
