12.3 Transport
➤ Prior to transport, remove the sound enclosure and the intake silencer.
12.3.1 Safety
Weight and center of gravity determine the most suitable method of transportation. Both are speci‐
fied in the dimensional drawings in chapter 13.2.
Precondition Transport only using a forklift truck or lifting gear and only by personnel trained in the safe trans‐
portation of loads.
➤ Make sure the danger area is clear of personnel.
12.3.2 Transport with a forklift truck
➤ Place the machine on a pallet, drive the forks completely under the pallet and lift carefully.
12.3.3 Transport with a crane
Suitable lifting gear ensures correct transportation.
Examples of unsuitable fixing points:
■ Pipe sockets
■ Flanges
■ Attached accessories
■ Rain protection covers
Precondition The lifting gear complies with local safety regulations.
No pressure should bear on the sides of the machine cabinet.
1.
The machine can be damaged by incorrect attachment of the lifting gear!
➤ Do not attach the lifting gear to any of the machine components.
➤ The manufacturer can advise on the use of suitable lifting gear.
2. Push 2 crowbars with Ø 2 in. through the holes provided in the frame. Attach slings and pad‐
ding, if required.
➤ Use the lifting gear correctly and lift the machine carefully.
12.4 Storage
Moisture can lead to corrosion, particularly on the surfaces of the blower block. The storage tem‐
perature must not fall below −22 °F.
Advice can be obtained from KAESER on storage and recommissioning.
12 Decommissioning, Storage and Transport
12.3 Transport
Number: 9_9572 28 USE
Installation and Operating Manual Rotary lobe blower
HBPI pr
87
