K9Safety K9Caller, Руководство по установке

Страница: 9 / 28

M1 Gray, Door Pop Trunk Pop (+/-) 7A Selectable. This wire provides a selectable positive/
negative 7Amp relay output that can be programmed for either door pop output or trunk pop
output. When selected as a door pop, this wire will send the selected output only when the
vehicle is in park and the K9 system is activated when triggered by the appropriate remote
signal button 3 or by an external trigger (See Branch 12). Connect this wire to the green pop
solenoid wire to pull the solenoid and ground the blue or to the blue wire to push and ground
the green. When selected as a trunk pop, this wire will send the selected output only when
triggered by the appropriate remote signal button 3. See program Branch 10 and Note, the
polarity can be changed between negative and positive depending on the jumper setting. See
Fig J1 below. Also, if both door pop and trunk pop are desired then use either aux1 or aux2
for trunk pop.
Please see pages 22-23 of this manual for instruction on installing the optional door pop hard-
ware.
M1-M16 Wire Connections Described, Continued
Page 9
Fig J1 : Jumper Selections On Board