Page 4
When connecting system wires to vehicle wires it is recommended
that you use the wire wrap technique.
Strip away 1/2
”
of the insulation on the vehicle wire. Evenly part
the strands of the vehicle wire. Strip away 1
”
of insulation at
the end of the system wire. Thread the un-insulated portion of the
system wire between the parted strand of the vehicle wire. Wrap
the threaded un-insulated system wire around the un-insulated
vehicle wire. Wrap electrical tape to cover the un-insulated system
and vehicle wire connection.
Vehicle Wire
System Wire
Find an accessible location inside the vehicle cabin to mount the MCU
keeping in mind how you will run the cables for the ignition harness and for
the programmable temperature display (CTD). Planning your installation will
ultimately save time and help to avoid service returns in the future.
A8 Orange/White, Disarmed Output (-) 500ma. This wire can be used to trigger a relay to
close when the alarm function is disarmed.
A7 White/Red, Aux 1 Output (-) 500mA. This output can be programmed to trigger when
remote button 5 is pressed followed by button 3. The output will trigger while the button is
held/ for a period of time/ or latch on/off depending on the selection made in programming
Branch 18. It can also be programmed to output when the vehicle has been started by a Hot
temperature trigger which can be useful to automatically turn on an air conditioner system or
fan(s).
Wire Connection Technique
A1-A8 Wire Connections Described
Содержание K9Caller
Страница 14: ...Page 14 ...
