K9Safety K9Caller, Руководство по установке

Страница: 8 / 28

M1-M16 Wire Connections Described, Continued
M8 White/Black, Hood Trigger Input (-) {shutdown}. Connect this wire to either a factory
hood pin switch that provides a negative signal when the hood is open or to the provided
hood switch. This connection is vital to prevent the system from auto starting the vehicle
while the is being serviced. Failure to properly connect this wire can result in an acci-
dental start and possibly injury. A magnetic contact or mercury switch can also be used.
M7 Black/White, Hot Temperature Alert Output (-) 500mA. This wire provides a steady
negative output while the temperature is at or above the alert threshold and the alert condi-
tion is triggered. It can be used to activate and optional window drop module, trigger an
optional SMS messenger or to energize a relay that can operates additional fans.
M6 Brown, Siren Output (+) 3A. Connect this wire to the positive side (red wire) of the
siren. It supplies a positive output when the alarm function is triggered and when the alarm
function is armed or disarmed if selected. See Branch 21 and remote operation.
M5 Violet, Door Trigger Input (+). Connect this wire to a factory door pin switch or dome
light trigger that shows positive when the doors are open and no positive when the doors are
closed. Traditionally a Ford type door trigger.
M4 Green, Door Trigger Input (-). Connect this wire to a factory door pin switch or dome
light trigger that shows negative when the doors are open and no negative when the doors are
closed. Traditionally a GM type door trigger.
M3 White/Violet, Window Up Output (-) 500mA. This wire will supply a 60 second nega-
tive output upon deactivation of a high temperature alert or a momentary negative output
upon deactivation of an auto start/run cycle. This wire can be used to trigger a window roll
up module.
M2 Orange, Alarm Armed Output (-) 500mA. This wire supplies a negative output while
the alarm system is armed. It is used to trigger the included starter disable/starter anti-grind
relay. This relay will disable the vehicle from being started when the security alarm is active
and will also prevent the starter from grinding if the vehicle is
“ auto
-started
” and the user
turns the ignition key to the start position.
Page 8