K2 Systems Everest CrossRail 44-X, Руководство по сборке

Страница: 14 / 24

14
Assembly
2
1
CUT RAILS TO LENGTH
Using Table 1 as a guide, cut the CrossRail 44-X/48-X/48-XL
profiles to the appropriate lengths according to the desired tilt
angle.
Materials required: CrossRail 44-X or 48-X or 48-XL, cutting tool
(i.e. Sawzall, etc.).
Select and install the appropriate roof attachment according to
the manufacturer’s instructions and the structural calculations
for CrossRail Tilt Up System. Typically,
a connection to the roof structure (i.e. rafters) is required.
Observe all applicable laws, regulations, ordinances and codes,
ensuring the integrity of the roof is maintained. Attach L-Foot to
roof attachment system as specified but the attachment manu-
facturer.
Materials required: appropriate roof attachment product, Everest
L-Foot or T-Foot and hardware.
INSTALL ROOF ATTACHMENT