4
General safety information
Please note that our general mounting instructions must be followed at all times and can be viewed
online at
www.everest-solarsystems.com/technical-information
T
The equipment may only be installed and operated by qualified and adequately trained installers.
T
Prior to installation, ensure that the product complies with on-site static loading requirements.
For roof-mounted systems, the roof load-bearing capacity must always be checked.
T
National and local building regulations and environmental requirements must be adhered to.
T
Compliance with health and safety regulations, accident prevention guidelines and applicable standards is required.
·
Protective equipment such as safety helmet, boots and gloves must be worn.
·
Roofing works must be in accordance with roofing regulations utilising fall protection safeguards when eaves height
exceeds 3 m.
·
At least two people must be present for the duration of the installation work in order to provide rapid assistance in the
event of an emergency.
T
Everest mounting systems are continuously developed and improved and the installation process may thereby change at
any time. Prior to installation consult our website at
www.everest-solarsystems.com/technical-information for up-to-date instructions.
We can send you the latest version on request.
T
The assembly instructions of the module manufacturer must be adhered to.
T
Equipotential bonding/grounding/earthing between individual parts is to be performed according to country specific stan-
dards, as well as national laws and regulations.
T
At least one copy of the assembly instructions should be available on site throughout the duration of the installation.
T
Failure to adhere to our general safety and assembly instructions and not using all system components,
Everest Solar Systems is not liable for any resulting defects or damages. We do not accept liability for any damage resulting
in the use of competitor’s parts. Warranty is excluded in such cases.
T
If all safety instructions are adhered to and the system is correctly installed, there is a product warranty entitlement of 25
years! We strongly recommend reviewing our terms of guarantee, which can be viewed at www.everest-solarsystems.com/
technical-information
We will also send this information on request.
T
The VdS 3145:2011-07 applies to the proper technical maintenance, inspection and any necessary repair. This includes
regular visual inspections and visual inspections in case of events. We recommend annual regular inspections including:
inspection of all system components for damage by e.g. weather, animals, dirt, debris, build-up, growth, roof penetration,
sealing, structural stability and corrosion. In addition, the tight fit of screws must be checked and if necessary, re-tightened
in accordance with the torques mentioned in the assembly instructions.
T
Dismantling of the system is performed in reverse order to the assembly.
Содержание Everest CrossRail 44-X
Страница 22: ...22 Notes ...
Страница 23: ...23 Notes ...
