Page 22
Instruction manual - G95
Kivex Biotec Ltd
To change back to temperature
Action
Key
Display
Press and hold setpoint key .
Press the HEAT key one time, then let go of
the setpoint key.
The display now shows the temperature.
Note
The time is shown as a 24 hour clock e.g 19.30 not 7.30 PM.
REST
The REST function will
restore all factory set values.
Any changes made to the displayed temperature, unit readings and controller value will be reset.
Note
Calibration value in the TUNE option will remain and not be reset.
Follow these steps to navigate in the REST option.
Action
Key
Display
Press and hold UP+DOWN key for 3
seconds to enter the the menu.
The option "UNIT" will appear in the
display.
Press DOWN key until the option "REST"
appears in the display.
Press and hold setpoint key to change
values.
While holding the setpoint key in, press
either the arrow UP or DOWN key.
When the display shows "----", * let go of
the setpoint key.
Press and hold UP+DOWN key for 3
seconds to exit the the menu.
*This means all factory values have now been restored
