Page 18
Instruction manual - G95
Kivex Biotec Ltd
St.St
The St.St (Start Set) option is the
timer function
for the
heat.
By using this option, time can be saved as the G95 can be ready for use before procedures
start in the morning.
Note
This function will only be working correctly if the clock is set.
Follow these steps to navigate in the St.St option.
Action
Key
Display
Press and hold UP+DOWN key for 3
seconds to enter the the menu.
The option "UNIT" will appear in the
display.
Press DOWN key until the option "St.St" ap-
pears in the display.
Press and hold setpoint key to change
values.
While holding the setpoint key in, press the
arrow UP to change the minutes and arrow
DOWN key to change the hour.
When the time is set, let go of the setpoint
key.
Press and hold UP+DOWN key for 3
seconds to exit the the menu.
Note
If the function Heat is set, a dot will light up in the right side of display.
St.St is connected with HEAT. It must be chosen when the timer starts.
To turn the heater on,
please see the option HEAT:
WARNING
Always make sure when the timer function is being used, that the heated area is clear
of any objects that might be damaged by the heat or adversely affected by it in any
way.
Caution should always be exercised when a heated area is turned on without any
supervision.
