Page 8
Instruction manual - G95
Kivex Biotec Ltd
4.3 Unit performance
The unit is connected and allowed to stabilise to the setpoint.
Culture dishes and/or test tubes are placed in the interchangeable warming blocks which are held in
secure positions during transport.
The chamber is purged with the desired gas mixture (regulated for example by the GH01). During
purging, the door is closed, but only sealed after purging. (See page 27)
The gas supply is disconnected from the (quick release) valve at the back of the unit.
4.4 Connections
Should the transport time exceed the charge time (of the built in battery) the unit can be connected to
the cigarette lighter socket found in most automobiles.
Note that the voltage from the car must be 12V, which is standard for cars.
When not in use the unit should be connected to the mains power supply.
The unit can only be heated up using the mains supply.
The car adaptor can only be used to hold the battery power, IT IS NOT A CHARGER.
4.5 General care
Do not obstruct or block the ventilation holes at the back of the unit.
Undue force or pressure should not be put on the front door when it is fully opened.
Ensure that the door hinges are clean and free of any obstructions.
When closing the door, ensure that there are no objects preventing it form closing, as too much force
will damage the closing catches. Thereby hindering its performance.
WARNING
This incubator is designed to transport pre warmed blocks and does not have the
capability of warming the blocks in a short period of time.
