Page 17
Instruction manual - G95
Kivex Biotec Ltd
INT.T
The INT.T (Integral Time) option is for changing the
base value
for the
PID controller.
This should not be attempted by unauthorised persons. If set at a different level the controlling principle
will be affected.
From the factory it is set to a closely calculated value specific for the model.
In version 3, this value is locked and can't be changed.
CAUTION
Do not change the value here. If by mistake any changes are made or doubts occur if the
value are correct please see the REST function in the menu for the restore of the defaults
Ti.St
The Ti.St (Time Set) option is for
setting the time.
Follow these steps to navigate in the Ti.St option.
Action
Key
Display
Press and hold UP+DOWN key for 3
seconds to enter the the menu.
The option "UNIT" will appear in the
display.
Press DOWN key until the option "Ti.St"
appears in the display.
Press and hold setpoint key to change
values.
While holding the setpoint key in, press
either the arrow UP or arrow DOWN key to
change the hour.
When the time is set, let go of the setpoint
key.
Press and hold UP+DOWN key for 3
seconds to exit the the menu.
