KNX/EIB
KNX Gateway for IR
17
Initial configuration for ON
Note: If the configuration of the initial status is not consistent with the IR code
learned by ON, there will be inconsistencies in the status of the realized control and the
feedback from the device to the bus. The control is controlled by the IR code and the
feedback is fed back according to the configuration of the initial status.
The following parameters are for setting the initial status when power on Air-condition.
——Parameter “Temperature”
This parameter is for setting the temperature of Air-condition when power on. Options:
16°C
17°C
...
30°C
——Parameter “Mode”
This parameter is for setting the control mode of Air-condition when power on. Options:
Heating
Cooling
Dehumidification
Fan
Auto
——Parameter “Fan speed”
This parameter is for setting the fan speed of Air-condition when power on. Options:
Auto
Low
Medium
High
