KNX/EIB
KNX Gateway for IR
22
Fig.5.3.2(4) “Heat-Fan auto-No Swing” parameter window
参数
“1->Assign IR code NO. [1..300]”
This parameter is for setting the IR code number corresponding to the combination function at
each setpoint temperature. Options:
1..300
参数
“Temperature”
This parameter notes the setpoint temperature contained in this IR code, but the control function is
indicated in the title of the parameter window (view on the left side of parameter configuration window).
So that, we need find IR code number in the IR code library according to control function and setpoint
temperature when the IR code number is assigned for previous parameter.
As shown in the window, Heat-Fan auto-No Swing on the left side indicates that the control
function is heat mode-auto fan speed-no swing, the IR code number corresponding to the setpoint
temperature 16°C is 9.
