KNX/EIB
KNX Gateway for IR
8
Air-condition device control
Support the similar control way of universal Air-condition gateway, that is built-in status save and
logic operation, can be controlled independently;
Support the function control and the status feedback: Air-condition switch, setpoint temperature,
modes, fan speed, and swing;
Set the connection with the window sensor, turn off Air-condition after delay a time when receives
the window open command, to save energy;
Set the connection with the presence sensor, turn off Air-condition after delay a time when receives
the room unoccupied command, to save energy.
Sequence sending function
Up to support 16 sequence controls. Each sequence supports 1 bit or 1byte scene value trigger, up
to support 4 IR commands binding sent, and each command can be set the delay time, the count and
the channel of emission.
Current function
( Only the Flush mounted support)
Supports a current detection function of up to 10A, can be connected with emission channel. Users
can set the setpoint current threshold value (decided by the technology for the load), to define the
power on/off status of controlled device. Current detection value and switch status can be both sent to
the bus.
