KNX/EIB
KNX Gateway for IR
11
Parameter “Check current status when emitting”
This parameter is visible when channel function is selected as “Universal IR control”. Set whether
to connect with current detection status. It decides the On or Off status of the controlled device
according to the current status, to avoid false triggering when the same IR code is used for On and Off.
If On and Off use different IR codes to control, no need to set connection. Options:
Disable
Local
External
Disable: No connection;
Local: local connection, the own current detection function of the device is used;
External: external connection, give the current status of external device detection to the device.
——Parameter “Monitoring period of current ON/OFF [0..255,0=inactive]min”
This parameter is visible when current detection status is selected as “External”. Set the
monitoring period of external current switch status. If current switch status from the external device is
not received during monitoring period, wrong current detection of external will be considered.
Options:
0..255, 0=inactive
——Parameter “Reply error of current detection”
This parameter is visible when the monitoring period>0. When external current detection is error,
set whether to send error telegram to the bus. Sent when status changes. Options:
None
0=no error/1=error
1=no error/0=error
None: no sending.
0=no error/1=error: when error, object “CHx-External error report” sends telegram “1” to the bus,
and no error sends “0”;
1=no error/0=error: when error, object “CHx-External error report” sends telegram “0” to the bus,
and no error sends “1”.
