KNX/EIB
KNX Gateway for IR
9
Chapter 5
Parameter setting description in the ETS
This chapter takes KNX Gateway for IR,Flush mounted,2-Fold as example to explain the ETS
system parameter setting of KNX gateway for IR. And the Ceiling and the Flush mounted are mainly
different in without current detection function.
5.1 Parameter window “DCA Note”
Fig.5.1 “DCA Note” parameter window
A noting message. Remote IR code learning and downloading must use IR Learner via DCA
software, you can download the DCA form MyKNX online shop or get it from the manufacture. In
order to use DCA normally, ETS must run in compatibility mode, which should be actived via ETS
Apps window in ETS5, as shown as follow figure.
