JW Fishers SeaOtter-2, Руководство по эксплуатации

Страница: 4 / 29

4
SeaOtter-2 Cautions
• ALWAYS PLUG THE CONTROL BOX INTO A GROUND FAULT BREAKER FOR SAFETY. IF
AN ELECTRICAL LEAK OCCURS TO THE WATER, THE GROUND FAULT BREAKER WILL
TRIP.
• NEVER PLUG THE CONTROL BOX POWER INTO ANY VOLTAGE OTHER THAN 120 VAC
(NEVER 220 VAC). IF ONLY 220 VAC IS AVAILABLE A STEP DOWN TRANSFORMER IS
NEEDED.
• 120 VAC IS DANGEROUS - DO NOT EXPOSE CONTROL BOX OR ELECTRICAL CONNEC-
TIONS TO WATER.
• AVOID UNNECESSARY ROUGH HANDLING.
• PRIOR TO LAUNCH, CHECK ALL FITTINGS.
• PRIOR TO LAUNCH, AND WITH POWER OFF, ROTATE ALL PROPS ONE TURN BY HAND.
• PROTECT THE MONITOR AND CONTROL BOX FROM THE ELEMENTS.
• KEEP HANDS AND FINGERS CLEAR OF THE PROPELLERS AT ALL TIMES.
• MAKE ELECTRICAL CONNECTIONS ONLY AS SPECIFIED IN THIS MANUAL. DO NOT
BYPASS ANY ELECTRICAL SAFETY CIRCUITS (GROUND FAULT).
• READ AND UNDERSTAND THE MANUAL BEFORE MAKING ANY REPAIRS TO THE
SeaOtter
.
• DO NOT OPERATE THE SeaOtter-2 OUT OF THE WATER, EXCEPT AS PROVIDED IN THIS
MANUAL.
• IF THE LEAK DETECTOR INDICATES A LEAK, REMOVE UNIT FROM THE WATER AS
QUICKLY AS POSSIBLE.
• DO NOT LIFT THE UNIT BY ITS UMBILICAL CABLE, LIFT AND LOWER THE SeaOtter-2 BY
MEANS OF THE HANDLE.
• DO NOT BEND THE UMBILICAL CABLE SHARPLY, A SHARP BEND COULD BREAK AN
INTERNAL WIRE IN THE CABLE.
• PLUG CONTROL BOX AND MONITOR INTO A GROUND FAULT OUTLET (ON SHIP).
• BE SURE TO UNPLUG MONITOR FROM CONTROL PANEL BEFORE CLOSING COVER.