JW Fishers SeaOtter-2, Руководство по эксплуатации

Страница: 21 / 29

21
First test run (out of water): continued
Horizontal Motors
Joystick
Vertical Motors
Joystick
Camera Pan Left/Right
Camera Tilt Up
Camera Tilt Down
Lights On
Lights Off
6) Select the rear camera (camera switch on control panel).
7) Using the pan and tilt buttons on the PS2 controller (left set of buttons ), move the camera left/
right and up/down. Note that the control panel readout displays the position of the camera.
8) Turn on/off the LED light ring by pressing the on and off buttons on the PS2 controller (the right
set of buttons).
9) Select the front camera (switch on control panel). Using the pan and tilt buttons on the PS2
controller (left set of buttons ), move the camera left/right and up/down. Note that the control
panel readout displays the position of the camera.
10) Select the front camera (camera switch on control panel).
11) Using the pan and tilt buttons on the PS2 controller (left set of buttons ), move the camera left/
right and up/down. Note that the control panel readout displays the position of the camera.
CAREFUL WITH THE NEXT STEP
(heat can damage the light housings if lights are left on for more than 5-10 seconds out of water)
12) Momentarily turn on the front lights, and then off, by pressing the on and off buttons on the PS2
controller (the right set of buttons).